Partner Manufacturers - Product Information

DVI-7570 - DVIGear (WILDCAT)- 4K HDMI CAT6 Extender, upto 3840 x 2160 /60p (4:4:4), bi-directional Power-over-Cable 'POC' (HDMI Extender)

DVI-7570-TX & DVI-7570-RX Connectors

Description:
Engineered for Value — DVIGear Wildcat™ Extenders utilize new technology that enables them to extend HDMI signals for a fraction of the cost of other twisted pair extenders. This result is achieved using visually lossless compression that allows resolutions up to 3840 x 2160 /60p (4:4:4) to be extended up to 30 meters (98 ft.) over a single CAT6A cable.

Easy to Integrate — The DVI-7570 supports bi-directional Power-over-Cable (POC). This gives integrators and system designers the flexibility to power the extender set at either end of the signal chain. The extenders occupy a minimal amount of space and can easily be concealed thanks to an ultra-compact metal case, which includes all required mounting hardware for a seamless, low-profile installation.

Well-Connected — The extender includes a buffered HDMI Loop Output for a local HDMI display on the Tx side. The Rx units include de-embedded Analog and Digital (TOSLINK) audio outputs to facilitate connections to an external audio system. These features, together with the Wildcat Extender’s exceptional performance, make it the ideal solution for cost-sensitive applications that demand high quality HDMI signal distribution.

Features:
• Supports HDMI v2.0, HDCP 2.2 compliant
• Supports resolutions up to 3840x2160 /60p (4:4:4) with visually lossless compression
• Extends HDMI and IR over a single CAT6A cable
• Maximum extension distances:

3840 x 2160 /60p: 98 ft. (30 m)
3840 x 2160 /30p: 230 ft. (70 m)

• Bi-directional Power-over-Cable (POC)
• Buffered HDMI Loop Output on DVI-7570-TX
• Analog and Digital (TOSLINK) De-embedded Audio Output on DVI-7570-RX
• Ultra-compact, low-profile case for easy concealment
• Locking DC power connectors for added security and reliability
• Mounting hardware included

Specification:
Supported AV Signals:

Video HDMI 2.0, DVI 1.0
HDCP HDCP 1.4 and HDCP 2.2
EDID Automatic EDID Pass-through from connected display to source
Embedded Audio Supports pass-through of embedded HDMI audio, including LPCM 2.0/2.1/5.1/6.1/7.1, and HBR Bitstream formats
De-Embedded Audio Analog Audio Output: supports Stereo Linear PCM Audio up to 24-bit / 192 kHz
Optical S/PDIF Output: supports Stereo Linear PCM Audio up to 24-bit / 192 kHz and Bitstream formats
IR Control Supports IR Pass-through from RX to TX unit

Connections / Indicators:

CAT Port 1 ea. shielded RJ45 female connector with LED Power and Signal indicators
HDMI Input / HDMI Output DVI-7570-TX 2ea. 19-pin female HDMI connectors for HDMI In and HDMI Out
DVI-7570-RX 1ea. 19-pin female HDMI connector for HDMI Out
IR Control DVI-7570-TX 1ea. IR OUT: 3.5mm Mini-Jack
DVI-7570-RX 1ea. IR IN: 3.5mm Mini-Jack
Analog Stereo Audio DVI-7570-RX 1ea. Analog Stereo Audio Out: 3.5mm Mini-Jack
Digital Audio DVI-7570-RX 1ea. S/PDIF Audio Out: TOSLINK Optical Connector
Service Port Micro USB Female
DC Power 1ea. 5.5 mm / 2.0 mm female screw-locking connector

Performance:

Supported Video Resolutions (1) Up to 4K /60p with 8-bit color (4:4:4)
Up to 4K /60p with 10-bit or 12-bit color (4:2:2 or 4:2:0)
Supported Video Formats RGB / YCbCr 4:4:4, YCbCr 4:2:2/4:2:0, YUV 4:4:4
Supported PC Resolutions (1) Up to 3840x2160 / 60 Hz
Maximum Pixel Clock Frequency (1) Supports pixel clock rates up to 600 MHz
Maximum Video Bit Rate (1) Supports digital signal bit rates up to 6.0 Gbps./color, 18.0 Gbps. total
Video Signal Latency 6x Lines Total (3x Lines on TX and 3x Lines on RX)
Built-in ESD Protection Human body model: ±8KV (air-gap discharge) and ±4KV (contact discharge)
Recommended CAT Cable CAT6A S/FTP (500 MHz) AWG 23, or CAT7 (Europe); Compliant with TIA/EIA-568B termination standard
Maximum Cable Distance 4K /60p: up to 98 ft. (30 meters) using CAT6A S/FTP (500 MHz) AWG 23 cable
4K /30p: up to 230 ft. (70 meters) using CAT6A S/FTP (500 MHz) AWG 23 cable
HDMI Input Cable Equalization Supports DVIGear's HR™ Series HDMI with cable lengths up to 5 meters at 4K /60p resolution

Power:

Typical Power Consumption 3.84 watts total
Power Extension Bi-directional Power over CAT6A cable
External AC Power Adapter Input: 100-240VAC, 50-60Hz / Output: +12VDC @ 1.0A

Mechanical:

Construction Heavy-duty steel enclosure with jet black finish
Dimensions (H x W x D) Each Unit: 0.72" x 2.42" x 3.47" (18.3 x 61.4 x 88.2 mm)
Weight DVI-7570-TX 5.64 oz (160 grams)
DVI-7570-RX 5.47 oz (155 grams)

Environmental:

Operating Temp. (Environment) +32° to +104°F (0° to +40°C)
Typical Case Temperature Tx Unit: 103.1°F (39.5°C) Rx Unit: 92.5°F (33.6°C)
Storage Temp. (Environment) -4° to +158°F (-20° to +70°C)
Operating / Storage Humidity 10% to 90% (non-condensing)

Regulatory Approvals:

TX / RX Units FCC, CE, RoHS
External AC Power Adapter CE, UL, C-UL, CEC, DOFT, GS, PSE, CCC, KCC, CB, TUV, RoHS, WEEE, S, RCM, Class II

Other:

Limited Warranty 3 Years Parts and Labour

Model Numbers:
DVI-7570 4K HDMI CAT6 Extender Set
DVI-7570-TX 4K HDMI CAT6 Transmitter
DVI-7570-RX 4K HDMI CAT6 Receiver

Accessories Included:
1x External AC Power Adapter (per set) 4x Mounting Brackets
1x IR Transmitter 1x Quick Start Guide
1x IR Receiver

Click here for further information